LM Glasfiber has local production facilities in Northern Europe, Southern Europe, Asia and North America. Our group headquarters, administration and R&D facilities are located in Kolding, Denmark.
Download photos of our factories in the USA, Canada, India, China, Spain and Denmark from the picture archive.
India is one of the main markets for LM Glasfiber. This picture is from the blade factory in Bangalore. Download Low-res(290 KB) Download High-res (9 MB) |
The Chinese market for wind energy solutions is experiencing rapid growth. LM Glasfiber has been producing rotor blades in Tianjin since 2001 and in Urumqi as of mid 2007. Download Low-res(304 KB) Download High-res (9 MB) |
The infusion process is controlled electronically to ensure a good and uniform result. Download Low-res(222 KB) Download High-res (12 MB) |
 Closing the blade. The two blade halves are glued together as one of the last processes of the moulding. Download Low-res(453 KB) Download High-res (26 MB) |  Two Chinese colleagues are working on the last finish on the blade at the new LM Glasfiber facility in Urmqi, China. Download Low-res(266 KB) Download High-res (22 MB) |  LM Glasfiber is a contract manufacturer, and all the blades leaving LM Glasfiber factories are adapted specifically to meet the customer’s individual requirements. Download Low-res(166 KB) Download High-res (4 MB) |
 Quality assurance and development of materials are important factors at LM laboratories. Download Low-res(123 KB) Download High-res (8 MB) |  LM Glasfiber is supplying rotor blades to the majority of the largest turbine manufacturers in the world. Download Low-res(110 KB) Download High-res (5 MB) |  By using an automatic glass wagon it is possilble for LM Glasfiber to improve the quality of the wings. This picture is taken at the LM Glasfiber factory in Hammelev. Download Low-res(319 KB) Download High-res (9 MB) |
 Quality assurance and development of materials are important factors at LM laboratories. Download Low-res(187 KB) Download High-res (9 MB) |  The test chamber in the LM Glasfiber wind tunnel is designed to achieve the best possible aerodynamic measurements. Download Low-res(324 KB) Download High-res (16 MB) |  The LM Glasfiber wind tunnel is built as a closed circuit in order to ensure full control of the air flow. Download Low-res(289 KB) Download High-res (15 MB) |
 The windtunnel test chamber recreates the enviroment in which rotor blades operate. The test profile is mounted on a turnable module. Download Low-res(279 KB) Download High-res (15 MB) |  The 1000 kW fan built in to the LM Glasfiber wind tunnel is specially designed and measures 3.2 metres in diametre. Download Low-res(208 KB) Download High-res (13 MB) |  The LM Glasfiber wind tunnel was officially inaugurated June 12, 2006. Download Low-res(278 KB) Download High-res (17 MB) |
 Canada was LM Glasfiber’s fastest growing market in 2006. The new factory in Quebec that opened in the beginning of the year is a good example of how LM Glasfiber, in close cooperation with customers, plans our global capacity in order to fulfil local needs. Download Low-res(272 KB) Download High-res (14 MB) |  LM Glasfiber in the USA is located in Grand Forks, North Dakota. Download Low-res(336 KB) Download High-res (7 MB) |
Our news section provides you with a quick overview of what is happening in the world of LM Glasfiber. Press releases are shown in chronological order.
Go to the news section
Get the whole story about LM Glasfiber, boiled down to just 2 pages. Our fact sheet gives you the info you need, with the most important facts and dates.
Go to mediakit
LM Glasfiber employs a large number of employees in the most important markets for wind energy.
More about our organisation, management and Supervisory Board